Description:
In Cell phone Robot project, we need two mobile phones. The "mobile controlled robot" is controlled by a mobile phone that makes a call to the another mobile phone attached to the robot. In the course of a call, if any button is pressed, a tone corresponding to the button pressed is heard at the other end of the call. This tone is called "Dual Tone Multiple-Frequency" (DTMF) tone. The robot perceives this DTMF tone with the help of the phone stacked on the robot. The received tone is processed by the microcontroller with the help of a decoder IC. The microcontroller then transmits the signal to the motor driver ICs to operate the motors.
2) The robot can be used for reconnaissance or surveillance.
3) The robot can be used anywhere there is the service provider tower of the connection provided that is mounted on the robot.
4) The robot is small in size so can be used for spying.
Photographs of Cell phone operated land rover Project:
You will get a CD with this project:
CD contains following things:
1) Project Report
2) Circuit diagram
3) PCB layout
4) Microcontroller program in assembley language
5) Hex file of the microcontroller code
6) Datasheets of all the components / ICs used in the project
In Cell phone Robot project, we need two mobile phones. The "mobile controlled robot" is controlled by a mobile phone that makes a call to the another mobile phone attached to the robot. In the course of a call, if any button is pressed, a tone corresponding to the button pressed is heard at the other end of the call. This tone is called "Dual Tone Multiple-Frequency" (DTMF) tone. The robot perceives this DTMF tone with the help of the phone stacked on the robot. The received tone is processed by the microcontroller with the help of a decoder IC. The microcontroller then transmits the signal to the motor driver ICs to operate the motors.
Description in detail:
On Cell phone robot we have mounted a 12V battery as the power supply for the circuit and the motors.
When the user calls the mobile which is mounted on the robot the call is received by auto-answer mode.
As the call continues when the user presses a button on his handset the tone that is generated is decoded by the DTMF decoder and the command is passed to the microcontroller which is pre-programmed.
The Microcontroller then passes the command to the motor driver ICs for motion.
On Cell phone robot we have mounted a 12V battery as the power supply for the circuit and the motors.
When the user calls the mobile which is mounted on the robot the call is received by auto-answer mode.
As the call continues when the user presses a button on his handset the tone that is generated is decoded by the DTMF decoder and the command is passed to the microcontroller which is pre-programmed.
The Microcontroller then passes the command to the motor driver ICs for motion.
Applications of Cell phone controlled robot
1) "Cell phone controlled robot"can be used in the borders for disposing hidden land mines.2) The robot can be used for reconnaissance or surveillance.
3) The robot can be used anywhere there is the service provider tower of the connection provided that is mounted on the robot.
4) The robot is small in size so can be used for spying.
Photographs of Cell phone operated land rover Project:
You will get a CD with this project:
CD contains following things:
1) Project Report
2) Circuit diagram
3) PCB layout
4) Microcontroller program in assembley language
5) Hex file of the microcontroller code
6) Datasheets of all the components / ICs used in the project
Project Cost :
5,500/-
5,500/-
contact me :- magicdoll.shinde2@gmail.com or ph:- 8421346407
No comments:
Post a Comment